Approx. Rs 850 / Kilogram(s) Get Latest PriceChromium CopperOverview
Chromium copper alloys are high copper alloys, containing 0.6 to 1.2% Cr. The chromium copper alloys are used for their high strength, corrosion resistance and electrical conductivity. The chromium copper alloys are age hardenable, which, in this case, means that a change in properties occurs at elevated temperature due to the precipitation of chromium out of the solid solution. The strength of fully aged chromium copper is nearly twice that of pure copper and its conductivity remains high at 85% IACS, or 85% that of pure copper. These high strength alloys retain their strength at elevated temperatures. The corrosion resistance of chromium copper alloys is better than that of pure copper because chromium improves the chemical properties of the protective oxide film. Chromium copper has excellent cold formability and good hot workability. It is used in applications such as resistance welding electrodes, seam welding wheels, switch gears, cable connectors, circuit breaker parts, molds, spot welding tips, and electrical and thermal conductors that require strength. Chromium copper alloys are designated as UNS C18050 through C18600, the cast alloys are C81400 through C81540.
The age hardening reaction occurs because the solid solubility of chromium in copper decreases as the temperature decreases. The structure of slow cooled chromium copper is a two phase mixture of chromium and alpha copper. Superior mechanical properties are achieved by fast-cooling the chromium copper alloys from the annealing temperature, so the chromium remains in a supersaturated solid solution with the copper. Followed by an aging treatment where the chromium precipitates from the solid solution forming a very fine dispersion of precipitates in the matrix. The microstructure of a quenched or quickly cooled chromium copper alloy appears similar to that of the unalloyed copper. A fast cool prevents the chromium from precipitating out of the solid solution, so the resulting cast structure consists of a single phase alpha copper structure. The first material to solidify is pure copper, followed by a eutectic mixture of alpha and chromium. The alpha and chromium eutectic material forms a lamellar structure in the interdendritic regions. The microstructure of the wrought alloy consists of equiaxed, twinned grains of alpha copper solid solution. Typically the allow are cooled rapidly so the chromium remains in alpha copper solid solution. The tempering treatment allows the chromium to precipitate out of solution forming a dispersion of chromium precipitates throughout the matrix. The chromium precipitates, or hardening precipitates, can be very fine and may not be visible at low magnifications.
Approx. Rs 700 / Kilogram Get Latest Price
We are a well-developed organization in the market, highly affianced in providing a broad assortment of Aluminum Bronze to our valuable customers. Highly utilized for numerous purposes, these are comprehensively valued in the industry. Our provided assortment can be taken by our patrons at market leading rates.
Approx. Rs 3,320 / Kilogram(s) Get Latest Price
|Minimum Order Quantity||1 Kilogram(s)|
|Size||0.1 TO 1000MM|
|Shape||ROUND FLAT SQUARE|
We are instrumental in offering our clients a high quality range of Beryllium Copper C17200 - C17500 - C17510 that is used in different industries. Following industry defined guidelines, we manufacture the entire range utilizing contemporary machines, modernize technology and prime grade copper. In order to ensure quality, the entire range of product is rigorously tested upon a series of parameters. In tune with clients'' diverse requirements, we offer the entire range in a wide range of specifications.
Approx. Rs 600 / Kilogram(s) Get Latest Price
CuCd1-UNS.C16200 Cadmium Copper alloys
A). CuCd1-UNS.C16200 Cadmium Copper alloys Details
CuCd1-UNS.C16200 Cadmium Copper alloys
CuCd1-UNS.C16200 Cadmium Copper alloy offers a unique combination of high tensile strength and high electrical conductivity for an industry where these properties are generally considered incompatible. The nominal composition of 99.0% copper and 1.0% cadmium can lead to these unique properties.
The cadmium noticeably increases the copper's strength and resistance to softening and stress relaxation with minimal decrease in its electrical conductivity. It also produces an alloy noted for its malleability and toughness and spring quality.
Typical Application for CuCd1-UNS.C16200 Cadmium Copper alloys:
Electrical Industry: Resistance Welding Electrodes, Circuit Breaker Switches, Stud Bases for Power Transmitters, Electrical Conductor Material
Consumer: Rod Extensions, Pencil-type, Light Soldering Guns, Tips
Industrial: Connectors, Solderless Wrapped, Welding Wheels, Trolley Wires
Custom Diameter & Sizes, Random Mill lengths
Available Products (forms):
Round bars, Flat bars, Square bars, Wires
Custom shapes are available upon request.
CuCd1-UNS.C16200 Cadmium Copper
Fe: 0.02% Max.
CuCd1-UNS.C16200 Cadmium Copper
Typical Physical Properties:
Density at 68°F: 0.321 Lbs./In.3
Specific Gravity: 8.90
Melting Point (Liquidus): 1076°C (1969°F)
(Solidus): 1030°C (1886°F)
Coefficient of Thermal Expansion per °F: 9.8 x 10-6 (77-212°F)
Electrical Conductivity at 68°F (volumetric): 90% IACS (aged and drawn)
Thermal Conductivity Btu/ft.2/ft./hr./°F at 68°F: 208
Modulus of Elasticity - Tension: 17,000 ksi
1). the units are based upon US Customary.
2). the typical physical properties apply to age hardened products.
D). CuCd1-UNS.C16200 Cadmium Copper
International Specification/Production Standards:
Rods/Bars/Wires: UNS.C16200, CDA 162, ASTM B105, SAE J 461 & 463
European Standards: CuCd1, DIN 17666
ASTM: American Society for Testing and Materials
Note: Unless otherwise specified, material will be produced to ASTM.
CuCd1-UNS.C16200 Cadmium Copper
The detailed Mechanical Properties will be available on request from customers.
F). CuCd1-UNS.C16200 Cadmium Copper
Most Commonly Temper Used:
Rods/Bars/Wires: 1/2 H (TD02), H (TD04), HT(TH04)
Approx. Rs 750 / Kilogram(s) Get Latest PriceC16500 Cadmium Tin Copper (CDA 165)
C16500 Cadmium Tin CopperTypical Uses for C16500:
Electrical: Springs, Contacts, Flat Cable, Trolley Wire, Clips
Industrial: Resistance Welding Electrodes
Density: 0.321 lb/in3 at 68 F
|Min/Max||-||.50 - .7||.6 - 1.0||Rem||.02|
|PRODUCT PROPERTY||US CUSTOMARY||METRIC|
|Melting Point - Liquidus||1958 F||1070 C|
|Melting Point - Solidus||-||-|
|Density||0.321 lb/in3 at 68 F||8.89 gm/cm3 @ 20 C|
|Electrical Resistivity||17.290 ohms-cmil/ft @ 68 F||2.87 microhm-cm @ 20 C|
|Electrical Conductivity||60 % IACS @ 68 F||0.351 Mega Siemens / cm @ 20 C|
|Thermal Conductivity||146 Btu . ft/(hr . ft2 . oF)at 68F||252.7 W/m . oK at 20 C|
|Modulas of Elasticity in Tension||17000 ksi||117000 MPa|
|Modulus of Rigidity||-||-|
|Specific Heat Capacity||0.090 Btu/lb/°F at 68 F||377.1 J/kg . °K at 293 K|
Approx. Rs 500 / Kilogram(s) Get Latest PriceOur range of Phosphor Bronze Castings is widely demanded for features like high strength, low coefficient of friction and fine grain. The range of Phosphor Bronze Castings is appreciated in the market for its features of perfect finish, modular design and smooth edges. Clients can avail the Phosphor Bronze Castings in customization with the details specified by them. Phosphor Bronzes PB1, PB2, PB3 & PB4 are predominantly used for their wear resistance and bearing properties. Bronzes PB1 and PB2 are preferred in the form of heavy duty gears, worm-wheels and bearings for the more critical applications where high working loads, high speeds, impact loading and pounding coupled with adequate lubrication and good alignment are found. Phosphor Bronze PB4 is adequate for the less critical applications. Phosphor Bronze Castings are extensively used in diversified industrial sectors.
Approx. Rs 990 / Kilogram Get Latest PriceTellurium Copper
GRADE: ASTM B301, C14500
Description: C14500 Tellurium copper round rod. C145 Tellurium is adapted for use in high-speed automatic screw machines. The copper telluride precipitations become finely dispersed throughout the matrix and assist in chip breakage into short pieces, thus enabling a much higher machining speed than with pure copper. Copper 145 Tellurium has a machinability rating scale of 85%, compared to pure copper of 20%, thus insuring longer tool life. The high conductivity of tellurium copper makes it a suitable material for electrical applications, and is an outstanding alloy for the production of hot forged products.
Transistor Bases, Motor Parts, Electrical Connectors, Switch Parts, Welding Torch Tips, Soldering Tips, Screw Machine Products, Forgings , Plumbing Fittings, Sprinkler Heads, Fixtures, EDM Anodes, Tool Making Parts, Dies /Welding Torch tips / Transformer & Circuit-breaker terminals
Copper (incl. Silver)
Approx. Rs 1,000 / Unit Get Latest Price
|Minimum Order Quantity||10 Unit|
|shape||Round, square, Flat|
|Conductivity % (IACS)||≥88|
|Forms available||Round/rectangular bar||Diameter : 6-100mm|
|Hexagon||A full range of|
|Other forms||Available upon request|
Approx. Rs 485 / Kilogram Get Latest Price
We are a famous company in the industry, engaged in providing an extensive collection of Copper Bar. Our provided products are developed and designed using supreme grade material and advent-grade technology in conformity with market quality norms and standards. Acknowledged for sturdiness and durability, these are exceptionally recognized by our patrons.
Approx. Rs 500 Get Latest PriceCopper Alloys C14300 Related Metals: No Related Metal names. Submit Specifications: UNS C14300 Chemistry Data Cadmium 0.05 - 0.15 Copper Includes Ag Cd Remainder Total Li by agreement General Information Principal Design Features Copper, Cadmium Copper, Deoxidized Machinability The machinability rating of this alloy is 20. (Where Alloy 360 FC Brass is 100). Welding Soldering is rated as "excellent", brazing is rated as "excellent", oxyacetylene welding is rated as "good", gas shielded arc welding is rated as "excellent", coated metal arc welding is "not recommended", spot welding is "not recommended", seam welding is "not recommended" and butt welding is rated as "good". Forging The hot forgeability rating of this alloy is 65. (Forging brass = 100). The recommended hot working temperature for this alloy is between 1400 and 1600 F. Hot Working This alloy's capacity for being hot formed is rated as "excellent". Cold Working The capacity for cold working this alloy is rated as "excellent". Annealing The annealing temperature for this alloy is between 1000 and 1400 F. Physical Data Density (lb / cu. in.) 0.323 Mechanical Data MSO currently has no data available for this grade.
Approx. Rs 2,000 / Piece(s) Get Latest PriceFacilitated by technically advanced process, we are presenting a distinguished collection of Resistance Seam Welding Wheel. Our offered wheel is manufactured using optimum quality steel and advanced technology by our skilled professionals. In order to ensure quality, this wheel is rigorously tested on various parameters. In tune with international standard, we provide the entire range in various sizes and finish, as per the ever-evolving requirement of our clients.
|RWMA Class||Alloy No|
|70 min||> 75||Hot-rolled steel|
|75 min||> 75||Coated Materials|
|Class 2 P||C18200|
|75 min||> 75||Premium grade for hot-rolled steel used with higher pressures|
|90 min||> 45||Stainless Steel|
High temperature Steels
Approx. Rs 495 / Kilogram(s) Get Latest PriceElectrolytic Tough Pitch Copper (ETP)ASTM B124, ASTM B152, ASTM B187, ASTM B370, ASTM B188 & B272
C11000 Electrolytic Tough Pitch, known as ETP Copper or tough pitch copper, has long been the standard type of commercial wrought copper used in the production of sheet, plate, bar, rod, strip and wire. Copper 110 has an extremely wide range of applications based on its conductivity, corrosion resistance, workability, and beauty.ETP COPPER APPLICATIONS
Farmer’s Copper Ltd. maintains an extensive inventory of etp copper in the sheet, plate, rod, and bar variety, and can provide material cut to your specifications on our bar saws, shears, precision plate saw, and water jet cut. Contact one of our professional sales staff today and let us help you with your tough pitch (ETP) copper needs.
Approx. Rs 825 / Kilogram(s) Get Latest Price
C18150 Copper Chromium Zirconium (RWMA Class II)
Used extensively for cap style resistance welding electrodes. Evidence suggests that it can provide less sticking and resist deformation longer than its copper-chrome counterpart in some specific situations.
Typical Uses for C18150 Copper Chromium Zirconium:
CONSUMER: Pencil-type & Light Soldering Guns: Tips, Rod Extensions
ELECTRICAL: Resistance Welding Electrodes
INDUSTRIAL: Welding Electrodes, Welding Wheels, Tips and Rod Extensions
CRCUZRMin/Max0.5 - 1.5Rem0.05 - 0.25Nominals1.000098.90000.1000
(ALLOY NUMBER)CHEMICAL COMPOSITIONHARDNESSCONDUCTIVITY(%)TENSILE STRENGTHClass 2 (18200)CR.60-1.2B70-8380-8550-70 ksiClass 2 (18150)Cr.50-1.5 / ZR.05-.25B70-8380-8550-70 ksi
PRODUCT PROPERTYUS CUSTOMARYMETRICCoefficient of Thermal Expansion9.5 . 10-6 per oF (68-572 F)16.45 . 10 6? per °C (20-200 C)Density0.321 lb/in3 @ 68 F8.89 gm/cm3 @ 20 CElectrical Conductivity80 %IACS @ 68 F0.464 MegaSiemens/cm @ 20 CMelting Point Liquid US1976 F1080 CMelting Point Solid US1958 F1070 CModulas of Elasticity in Tension17000 ksi117200 MPaSpecific Gravity8.898.89Thermal Conductivity187.0 Btu . ft/(hr . ft2 . °F) @ 68 F323.9 W/m . °K at 20 C
Approx. Rs 390 / Kilogram Get Latest Price
|Shape||Round, square, hex|
High Tensile Brass Rods -
IS 320 HT1 or HT2
BS 2874 CZ114 or CZ115
JIS 3250H C6782 or C6783
Chemical RequirementsHT1HT2Copper56.0 - 60.0%56.0 - 61.0%Lead0.20 to 1.50%0.50 to 1.50%Iron0.20 to 1.25%0.20 to 1.50%Tin0.20 to 1.0%1.0% maxAluminum0.2% max0.30 to 2%Manganese0.25 - 2.0%0.50-2.0%Total Imp.0.50% max0.50% maxZincRemainderRemainderPhysical PropertiesConditionSizeT.S. MPaEL% MinT.S. MPaEL% MinAs manufacturedAll Size430 min20%460 min20%Cold-worked & Stress10-40480 min12%520 min12%Relieved40 above500 min15%Fabrication PropertiesCapacity for beingCold formedPoorFairHot workedGoodGoodMachinability Rating30%30%Resistance to CorrosionExcellentExcellentSuitability for solderingExcellentFairUsesHT1 is suitable for SolderingHt2 is suitable for Machining
Approx. Rs 500 / Piece(s) Get Latest PriceNaval Brass Naval brass is the classic marine, high-strength and corrosion-resistant alloy containing 60 percent copper, .75 percent tin and 39.2 percent zinc. It is widely used in marine construction where strong, corrosive-resistant and hard material is required and is suitable for both salt and fresh water applications. Naval brass is used in propeller shafts, marine hardware, decorative fittings, shafting, propeller shafts and turn buckles. There are also many industrial applications, such as welding rods, condenser plates, structural uses, valve stems, balls, heat exchanger tubes, aircraft turnbuckle barrels, dies, golf balls, and many more.
C462 brasses are very useful because of their strength, ductility & formability, fair electrical conductivity, and good corrosion resistance. Common applications for brasses include forged, stamped, rolled, and cold-headed products for electrical, mechanical or corrosion resistant applications. Due to their colorful nature, brasses are often used for decorative and architectural products and marine hardware.
|PRODUCT PROPERTY||US CUSTOMARY||METRIC|
|Density||0.305 lb/in3 at 68 F||8.84 gm/cm3 @ 20 C|
Approx. Rs 350 / Kilogram(s) Get Latest Price
|Copper (%)||Zinc (%)|
1.02% tin, 1.74% iron
Designed for use in marine service owing to its corrosion resistance, hardness and toughness. A characteristic application is to the protection of ships' bottoms, but more modern methods of cathodic protection have rendered its use less common. Its appearance resembles that of gold.
Good cold working properties. Used for ammunition cases.
Also called rivet brass . Cheap and standard for cold working.
Softest type of brass commonly available. Gilding metal is typically used for ammunition bullet "jackets", e.g. , full metal jacket bullets.
Has a high tensile strength and is used for springs , screws , and rivets .
An alpha-beta brass with an addition of lead . It has excellent machinability.
Defined by California Assembly Bill AB 1953 contains "not more than 0.25 percent lead content".
Most notably used in making golden dollar coins in the United States.
traces of iron
Used as a lining on boats.
Similar to admiralty brass.
Used to make pound coins in the pound sterling currency.
5% aluminium, 1% tin
Used in 10, 20, and 50 cents euro coins .
A type of alpha brass. Due to its yellow color, it is used as an imitation of gold. Also called Prince Rupert's metal , the alloy was named after Prince Rupert of the Rhine .
5% tin, 5% lead
Both an American term for the copper-zinc-tin alloy known as gunmetal , and an alloy which is considered both a brass and a bronze. Red brass is also an alternative name for copper alloy C23000 , which is composed of 14–16% zinc, 0.05% iron and lead, and the remainder copper. It may also refer to ounce metal , another copper-zinc-tin alloy.
Rich low brass, Tombac
Often used in jewelry applications.
An American term for 33% zinc brass.
Approx. Rs 590 / Kilogram(s) Get Latest Price
|Standard: BS 1400|
|Standard: BS 1400|
Approx. Rs 450 / Kilogram Get Latest Price
|Standard: IS: 318-1981|
|Standard: IS: 318-1981|
Approx. Rs 500 Get Latest PriceC46400 Naval Brass "Lead Free"
Naval Brass C46400 is nominally composed of 60% copper, 39.2% zinc and 0.8% tin. As is typical of brass alloys with the duplex alpha beta structure, C46400 has good strength and rigidity. By substituting tin for an equal quantity of zinc, a high corrosion resistance to seawater is achieved. The addition of tin also gives the alloy an inherent resistance to dezincification, thereby further inhibiting the impingement by seawater at higher than normal temperatures. The alloy is also noted for its resistance to wear, fatigue, galling, and stress corrosion cracking.Typical Uses for C46400 Naval Brass "Lead Free":
BUILDERS HARDWARE:Lock Pins
ELECTRICAL: Precision Shipboard Equipment
FASTENERS: Rivets, Bolts, Nuts
INDUSTRIAL: Welding Rod, Condenser Plates, Structural Uses, Valve Stems, Balls, Heat Exchanger Tube, Aircraft Turn Buckle Barrels, Bearings, Dies, Golf Ball Production, Pressure Vessels, Bearings, Bushings, Hub Cones
MARINE: Properller Shafts, Marine Hardware, Decorative Fittings, Shafting, Propeller Shafts, Turn buckles
ORDINANCE: Missle Components
OTHER: Baffle Plates and Flanges
|Min/Max||59.0 - 62.0||0.1||0.2||0.5 - 1.0||Rem|
|PRODUCT PROPERTY||US CUSTOMARY||METRIC|
|Coefficient of Thermal Expansion||11.8 Ìâåá10-6 per oF (68-572 F)||21.2 Ìâåá 10 6? per Ìâå¡C (20-300 C)|
|Density||0.304 lb/in3 @ 68 F||8.41 gm/cm3 @ 20 C|
|Electrical Conductivity||26 %IACS @ 68 F||0.152 MegaSiemens/cm @ 20 C|
|Electrical Resistivity||39.9 ohms-cmil/ft @ 68 F||6.63 microhm-cm @ 20 C|
|Melting Point Liquid US||1650 F||899 C|
|Melting Point Solid US||1630 F||888 C|
|Modulas of Elasticity in Tension||15000 ksi||103400 MPa|
|Modulas of Rigidity||5600 ksi||38610 MPa|
|Specific Heat Capacity||0.09 Btu/lb/Ìâå¡F @ 68 F||377.1 J/kg Ìâåá Ìâå¡K at 293 K|
|Thermal Conductivity||67.0 Btu Ìâåá ft/(hr Ìâåá ft2 ÌâåáÌâå¡F) @ 68 F||116.0 W/m Ìâåá Ìâå¡K at 20 C|
Approx. Rs 500 Get Latest PriceC48200 Naval Brass "Medium Lead"
Marine hardware, screw machine products, valve stems.
Common Fabrication Processes
Hot forging, pressing and machining.
Gas Shielded Arc Welding
Coated Metal Arc Welding
Capacity for Being Cold Worked
Capacity for Being Hot Formed
Approx. Rs 400 Get Latest PriceC48500 Naval Brass "High Leaded"
ASTM B21, AMS 4611
High ductility, high electrical and thermal conductivity, high impact strength, good creep resistance, ease of welding, and low volatility under high vacuum.Typical Uses for C48500 Naval Brass "High Leaded":
INDUSTRIAL: Valve Stems, Light Bearings, Gears, Screw Machine Parts
MARINE: Marine Hardware, Seawater Valve Stems
Approx. Rs 725 / Kg Get Latest Price
Quality being the sole concern, we offer functionally updated range of aluminium Bronze that is treasured for high strength and durable finishing. Our entire product range is performance based and has high tolerance capacity.
Aluminum Bronze is dimension accurate and is delivered in well-defined time period.
The numerous and varied applications for aluminum bronze alloys reflect fully their versatility as engineering materials.
Aluminum bronzes are finding increasing use in :
· Petrochemical and desalination plant
· Marine, offshore and shipboard plant
· Power generation
· Automotive and railway engineering
· Iron and steel making
· Electrical manufacturing and
· Building industries.
Many applications are related to the marine environment because of the outstanding performance in seawater of aluminum bronze.
Others: Max: 0.5%
Hardness : 192 HB
Elongation A5 % : 14
Approx. Rs 790 / Kg Get Latest Price
|Minimum Order Quantity||1 Kg|
|Color||Copper - Aluminium|
COPPER ALUMINIUM CLADED METAL :Copper Aluminium Bi-metal Sheet Supplier In India (commonly known as Copper Aluminium Bimetal or COPRAL ) :From ready stock, We supply Aluminium copper claded bi-metal (ALCU) which consists of copper (sheet metal) claded on pure Aluminium (base metal), Both metals being diffused together to form an inseparable whole by roll bonding process. Some features include:Safe to use and require very low costs.The presence of Wis prevents Corrosion and oxidation.Terminals are provided with PVC insulation to provide di-electric strength.Shock-proof entry is developed in the wire barrels.Strict quality control and proper specifications are followed during their manufacture.This is not an alloy and copper layers are not Electroplating / galvanic coatings but are rather mechanically welded on Aluminium with Copper sheets.Aluminium Terminals are directly connected to Copper Terminals to carry current at a high voltage, bimetallic galvanic corrosion occurs, resulting in a high resistance at the joint. The heated joints are oxidized and losses contact resulting in sparks, voltage dropout power losses, and failure, damage to machinery.When this is placed between Aluminium Terminal and Copper Terminal at the joint (with Copper facing Copper and Aluminium facing Aluminium), bimetallic galvanic corrosion is averted due to absence of air. It is thus used at dissimilar metals joints of Aluminium and Copper to make similar metal contact. This has been successfully evaluated and used by many of the worlds leading electrical equipment manufacturers.Aluminium Copper Clad metal Terminals: AI-Cu bi-metal terminal are used for connecting aluminium cable to copper busbars, Washers to prevent bimetallic galvanic electro-corrosion at copper and Aluminium joints. Applications Busbar chambers Bus ducts Cable clamp Circuit breakers Isolators On overhead lines Panel boards Switch bladesSwitch plantSwitchgearsTerminal stripsTerminals of copper connectingMotor control centersCable end connectorsOverhead connectorsApparatus constructionCable thimbles in copperCurrent bars & similar partsBimetallic clamp & connectorsDistribution and panel boardsconductors with aluminium conductorsOverhead busbar trunking systemsAs packing & washers bet aluminium & copper barsSleeve shape insert in terminals in copper & aluminiumSubstation accessories like bimetallic clamp and connectors
Approx. Rs 450 / Kilogram(s) Get Latest Price
With genuine efforts and hard work of our specialists, we have engraved a niche for ourselves in this market by providing high quality Commercial Copper Plates. These provided products are widely accepted and commended for their attractive designs and durable nature. Extensively utilized, these offered products are highly acknowledged in the market.
Approx. Rs 650 / Kilogram(s) Get Latest Price
Assisted by the crew of accomplished and diligent professionals, we are betrothed in offering a comprehensive collection of Phosphor Bronze. These provided products are developed by using supreme grade material at well-installed premises. Obtainable in diverse stipulations, these can be customized as per the requirements of our patrons.
Approx. Rs 950 / Kilogram(s) Get Latest PriceElectrodes used in resistance welding are considered a consumable tool and come in various shapes, depending upon the application. Welding electrodes are designed to perform one or more of the following functions:
Approx. Rs 350 / Kg Get Latest Price
|Minimum Order Quantity||1 Kg|
|Packaging||20-60 kg per pack|
|Thickness||3 mm, 2 mm, 1.2 mm, 0.8 mm|
|Single Piece Length||3 meter, 6 meter|
|Wire Material||Copper/Copper Alloy|
|Quantity Per Roll||20 kg, 5 kg|
|Shape||Rectangular, Square, Round, hexagonal|
CuZn40 (Muntz Metal) is a brass alloy with 40% of zinc. It has a two phased structure of alpha- and beta- phase. The alloy is mainly used for decorative purposes due to the deep bronzed color. The alloy has limited cold formability, yet it has a good hot formability. Due to the high zinc content the alloy is economically interesting. Fields of application are Architecture and decorative applications.
The electrical conductivity depends on chemical composition, the level of cold deformation and the grain size. A high level of deformation as well as a small grain size decrease the conductivity.
Brass is resistant to: Natural, industrial and salt bearing atmospheres, drinking water, alkaline and neutral saline solutions. Brass is not resistant to: Acids, ammonia, halogenide, cyanide and hydrogen sulfide solutions and atmospheres as well as sea water (especially at high flow rates). Under certain circumstances (high Cl content and low carbon-hardness) dezincification can be an issue with CuZn40. The alloy also has a certain sensitivity to stress corrosion cracking when exposed to certain environments (e.g. ammonia, amine or sal ammoniac). The alloy should be stress relieved if stress corrosion cracking might be an issue.
Architectural panels, large architectural trim, sheet, structural, heavy plate, door frames, decoration, hardware