Teflon PTFE Products

Approx. 240 / Square Meter Get Latest Price

Product Brochure

The superior coating has the needed strength along with the dimensional stability of the fiberglass. Moreover, it offers easy release and has heat resistance of PTFE. It features comparatively heavier coating of PTFE.

The advanced PTFE coated fabric is available in a wide variety of designs, sizes and models. It has been carved keeping in mind the specific usability in many industries. Besides, it is customized as well to meet each specification.

We have a dedicated team of most experienced professionals who make sure the products are tested at every stage in order to have flawless quality. The standard fabric is used in many applications such as, composite mold release, polymer processing, food dehydration, release sheets, separation materials etc.

Approx. 11 / Square Inch Get Latest Price

PTFE is used as a non-stick coating for Belgian Waffles pans and other cookware. It is nonreactive, partly because of the strength of carbon–fluorine bonds, and so it is often used in containers and pipework for reactive and corrosive chemicals. Where used as a lubricant, PTFE reduces friction, wear, and energy consumption of machinery. It is commonly used as a graft material in surgical interventions. Also, it is frequently employed as coating on catheters; this interferes with the ability of bacteria and other infectious agents to adhere to catheters and cause hospital-acquired infections.

Price on Request: Get Latest Price

CARBON FILLED PTFE EXCELLENT MECHANICAL AND WEAR PROPERTIESCarbon Filled PTFE was developed to provide a PTFE based material with improved mechanical strength.PTFE on its own has excellent frictional properties, elasticity and wear resistance but relatively poor mechanical strength and tends to fail in high PV applications.??CARBON FILLED PTFE PROPERTIESCarbon in itself is a brittle material with poor wear properties and mechanical strength. However with the two combined in Carbon Filled PTFE formulations, the resultant material has excellent mechanical and wear properties, retains the excellent frictional properties and is an excellent choice for seals and rings in dynamic and high pressure applications.Carbon filled PTFE also provides good thermal conductivity, low permeability and is also electrically conductive making it a good choice for anti-static applications??POSSIBLE VARIATIONSThe most common carbon filled PTFE composition is 75% Virgin PTFE with 25% Carbon powder by weight.When a filler ratio or type is unspecified, it is fair to assume this is the material. However it doesn t tell the whole story. The type and percentage of carbon added to PTFE is a variable and is critical to material performance.It can be as little as 0.2% and as much as 40%.??Different percentages of carbon will display different material properties and performance.Something that??is often overlooked is that different types of carbon powder can also affect the material integrity and performance. To achieve the optimum physical properties and performance from any filled PTFE it is essential that the properties and type of fillers used are understood.Not all 25% carbon filled PTFE materials are the same, in fact they can be extremely different.STRENGTHS???Good thermal and electrical conductivity???Good chemical resistance???Very economical???Improved wear resistance under loadWEAKNESSES???High percentage fillers mean low elongation???Conductivity can be a problem

Approx. 650 / Kilogram(s) Get Latest Price

With enormous knowledge and information in this field, we are highly affianced in offering our patrons a quality guaranteed assortment of Teflon Rod. To offer perfect quality at our patrons end, these products are quality verified by our quality crew on varied parameters. The provided collection is very durable in nature.

 

Features:

• Rugged

• Easy to install

• Sturdy in nature

 

Approx. 1,730 / Square Feet Get Latest Price

Specialist in Industrial Product Finishing-Fluoropolymer Coatings
• P.T.F.E., P.V.D.F., F.E.P., P.F.A, ECTFE Like Halar Coatings,
• Nylon Coatings,
• Plastic Coatings, "PVC Coating"
• Powder Coating,
• Epoxy & Polyurathine Finishes
• Stoving Finishes
• Air Dry Finish Paomtomg and Flock Coating,
• PU-Elostomer Roller Coating

Approx. 700 / Kilogram Get Latest Price

As a quality-focused firm, we are readily focused towards presenting a high quality range of PTFE Sheet to our customers. The whole range is designed by utilizing sophisticated technology and quality assured inputs. As per the prevailing demands of the industry, these products are developed by us in multiple designs to choose from.
 
Features:

Easy to use

Flawlessly finished

Enhanced quality

Price on Request: Get Latest Price

Assisted by our immense industrial competence in this arena, we are actively committed towards presenting an extensive variety of Teflon PTFE Bush Pipe. These are developed and designed with the usage of best in class material and advanced machinery in tune with the set quality guidelines. Immensely demanded owing to their smooth finish, these are highly recommended.

 

Features:

• Smooth finish

• Accurate dimensions

• Reliable

 

Approx. 10 / Piece(s) Get Latest Price

General Properties:

PTFE mechanical properties are low compared to other plastics, but its properties remain at a useful level over a wide temperature range of -100°F to +400°F (-73°C to 204°C). Mechanical properties are often enhanced by adding fillers (see filled grades below). It has excellent thermal and electrical insulation properties and a low coefficient of friction. PTFE is very dense and con not be melt processed - it must be compressed and sintered to form useful shapes.

Filled Grades:

PTFE's mechanical properties can be enhanced by adding fillers such as glass fibers, carbon, graphite, molybdenum disulphide, and bronze. Generally, filled PTFE's maintain their excellent chemical and high temperature characteristics, while fillers improve mechanical strength, stability, and wear resistance. The properties of 25% glass-filled PTFE grade are shown below. There are literally dozens of different filled PTFE products and grades - too many to be listed here. Please contact EPM for more information about other filled PTFE products for your application.

Approx. 1,300 / Kg Get Latest Price

The addition of Bronze to PTFE gives better dimensional stability and lowers creep, cold flow and wear. It increases hardness and compressive strength whilst also increasing thermal and electrical conductivity.
 
BRONZE FILLED PTFE PROPERTIES
Bronze Filled PTFE is reinforced with bronze powder with the percentage varying between 40% and 60%, resulting in a very hard wearing material. It has weaker chemical resistance than other grades of PTFE and isn''''t suitable for electrical applications.
STRENGTHSExtremely hard wearing materialVery heavy – high specific gravityElectrically conductiveWEAKNESSESNot suitable for electrical applicationsPoor chemical resistance

Approx. 620 / Kg Get Latest Price

GLASS FILLED PTFEPTFE WITH IMPROVED COMPRESSION AND WEAR PROPERTIESGlass fibre is the most commonly used filler in PTFE.
Glass fibre is used as a PTFE filler as it offers much improved compression and wear properties.  The material may also be inert gas sintered to further improve creep properties and reduce porosity and gas permeability (there would be a consequent loss of tensile properties).
 
GLASS FILLED PTFE PROPERTIESGlass Filled PTFE is reinforced with glass fibres with the percentage varying between 5% and 40% depending on the needs of the application. As the filler percentage increases so does the properties the filler offers (increased compressive strength, lower deformation under load) but conversely the coefficient of friction properties of the material increases over that of virgin PTFE.

Approx. 300 / Piece(s) Get Latest Price

Approx. 350 / Piece Get Latest Price

PTFE (Poly–tetra-fluoro-ethylene) is a synthetic fluoropolymer ‘accidentally’ invented by Roy Plunkett that finds numerous applications. It is well known by the DuPont band name Teflon. PTFE is a material of remarkable properties; non-stick, friction-free, self-lubricating, non-wetting, non-flammable, non-brittle, non-toxic, resistant to atmospheric conditions, resistant to fungus growth and resistant to all chemicals (except molten alkali metals and fluorine at elevated temperatures and pressures). Its electrical properties are equally outstanding. All properties are maintained over a wide working temperature range of -200oC to +350oC.

Fiber-Glass too is a material of remarkable properties. Fabrics made from continuous filament yarn exhibit superior properties in terms of high tensile strength, low elongation, high temperature resistance, electric and sound insulation etc.we develop a matrix of the two materials - PTFE + Fiberglass i.e. PTFE coated Glass Cloth. Although not the first to develop we are now by far, the largest manufacturer. Various varieties are made on our towers which are the most sophisticated in the country. Should the end application demand colourful fabrics - we have them. Controlled manufacturing processes and rigid inspection procedures give the right quality of the material that is capable of resolving a wide range of problems. Conductive grades of fabrics are also our specialty where the static & charge needs to be handled carefully.

Requirements to cover Antennas at high altitudes have been successfully matched with PTFE coated fiber glass fabrics used as Radomes. Special grades have been developed which allows micro-waves to pass through. They protect the Antennas from snow, dust, rain, moisture, bird nest etc.

We offer a wider range of PTFE products than any other manufacturer, including PTFE coated Glass Fabric in sheets, rolls, tapes, discs, laminates, belts and threads.

Approx. 6 / Piece Get Latest Price

Teflon tape is a PTFE Gasket material. Because of Excellent Chemical & Thermal Resistance, can be used in variety of Static Sealing applications in nearly all types of applications.The exceptional malleability of the Expanded PTFE allows the use with Stress Sensitive connections & applications where only a limited flange load is available.e.g.Plastic Flanges, Glass Flanges etc.

Technical Data:

• Temp.Range:-240 to =+260 Deg.Cent.
• Chemical Resistance to almost all chemicals (pH-0 TO 14)
• Pressure- upto 100 bar.
• Density -.50g/cm3 /
• Color - White
• Non toxic-No Smell OR Test /Fulfills FDA 21 CFR 177.1550

Advantages:

• Quick & Simple Installation:Adhesive strip makes installation easier
• Reduced Down Time -No cutting or punching of gasket is necessary
• Few spools of different sizes cover most of the applications within the plant
• No Waste : Mono Tape 12 is a Gasket from Spool so NO Material gets wasted

Approx. 200 / Meter(s) Get Latest Price

PTFE Cables have outstanding Mechanical & electrical properties. These are heat resistant. Its properties qualify them for an ever-widening range of wiring a applications, they are used in many situations, where temperature is between -65°C and +250°C.

In most adverse uses, where chemical fumes and liquids would render all other cables cables useless, PTFE is the most well-known and durable polymer and has been used in the cable industry for many years, It’s outstanding dielectric properties, even at elevated temperatures, make it most suitable for insulation of cables.

Performance Characteristics:

• High dielectric values of any known flexible insulator resulting in excellent space and weight saving.
• Wide operating temperature range-65°C to + 250°C.
• Inert to most chemicals and fluids even at elevated temperature and pressure.
• Unaffected by oils, lubricants, hydraulic fluids and aircraft / rocket fuel.
• Insulation by tape wrapping and sintering process-ensures uniform insulation thickness eith near extruded finish.
• Non –flammable, non – toxic, resistant to solder iron damage.
• Suitable for high frequency operation.
• Immune to agene, fungus and water absorption. (a) Resistance to UV radiation and stress creaking. (b) High strain and abrasion resistance.

Specifications:

• Minimum bending Radius: 10 x cable dia
• Temperature range : -65°C to 200°C for silver plated
• Conductor: -65°C to 260°C for Nickel/Bare
• Insulation Resistance: 2 G ohm x Km.
• Radiation Resistance: 3 x 107 CJ/Kg.
• Dielectric Constant Hz and a temp: 2.1 in the range from OHz to 109 range - 190°C to +205°C

Price on Request: Get Latest Price

Approx. 750 / kg Get Latest Price

Approx. 950 / Kg Get Latest Price