Poly Metal India
Poly Metal India
Ganesh Peth, Pune, Maharashtra
Send E-mail
Call 0804604958977% Response Rate
Home  » Our Products » 

Nylon - Metalon - Oilon - Delrin - POM - UHMWPE

Our range of products include oilon rods sheet - nylon - nyloil, pp ball (polypropylene), nylon sheet, nylon ball, cast nylon heavy rods and delrin pom rod (polyoxymethylene).

Get Best Quote

Approx. 200 / Piece(s) Get Latest Price

We are readily involved in offering a huge compilation of Oilon Rods Sheet. Available with us in a variety of sizes, these offered products are highly demanded. Moreover, their high strength makes these highly claimed. Also, our customers can get these from us at most reasonable rates in customized packing solutions.



  • Self-lubricating: the friction coefficient is the lowest of all the cast nylons
  • Wear resistance: better than PA6 natural
  • Tensile stress and compressive strength is like Omniamid G whilst shock resistance is higher, the E-modulus is lower
  • Machining: excellent on machine tools
  • Color: Green

Yes! I am interested

Get Best Quote

Approx. 10  Get Latest Price

Polypropylene Balls


Poly Metal India offer a wide range of polypropylene balls. Made from high quality polypropylene, these polypropylene balls are known for their high impact and chemical resistance. These polypropylene balls have a 50% higher temperature rating than UHMW at the same cost. These polypropylene balls are lightweight and dimensionally stable - good for low-cost fabrications..

Yes! I am interested

Get Best Quote

Approx. 290 / Kilogram(s) Get Latest Price

We are enlisted amongst one of the eminent names of the industry affianced in offering a distinctive spectrum of Nylon Sheet. The materials required in the processing process are purchased from reliable suppliers of the industry after stern quality examinations. Moreover, these are well checked before getting shipped at the end of our customers



  • Precise

  • Finely finished

  • Elevated durability


Yes! I am interested

Get Best Quote

Approx. 10 / Piece Get Latest Price

Also known as Polyamide has high tensile strength, good abrasion and impact resistance and is widely used in many domestic and industrial products. Having a higher melting temperature than other conventional plastics it can be used when added heat resistance is necessary. It offers good chemical resistance to common chemicals, alkalies, weak acids and is compatible with motor oil, transmission fluid, and methanol. Common uses include; screws, gears, knobs, and other low stress industrial applications formally made in metal.

Standard Sizes: 1/16", 3/32", 1/8", 5/32", 3/16", 5/16", 1/2", 1", 1-1/4", 1-3/8", 1-1/2", 1-3/4"

Specific Gravity1.14 g/ccMelting Point554 F / 290 C
Hardness, Rockwell115Max Operating Temperature210 F / 99 C
Tensile Strength11,500 psiHeat Deflection Temperature200 F / 93 C
Compressive Strength12,500 psiWater Absorption24 hr 1.2%
Flexural Strength15,000 psiFlammabilityUL94 V-2


Yes! I am interested

Get Best Quote

Approx. 290 / No Get Latest Price

Product Details:
Minimum Order Quantity1 No
Size Diameter10 to 1000mm
ShapeRound , flat, square, bush
Tensile Strength82.7Mpa
Tolerance Range+-0.5mm
I Deal InNew Only
Size/Diameter10 to 1000dia, 1/2 inch

We manufacture Nylon Developed by incorporating extrusion / Cast technique, our offered rods are extensively demanded to be used in bearings, grommets, nuts & bolts, washers, cams, gears, spindles and pulleys. Apart from having physical and mechanical properties, these rods are known for their features like good impact resistance, heat resistance, good shock absorbing properties, non-inflammability, toughness and abrasion resistance.
Some of the outstanding characteristics are as follows:
Excellent wear resistanceSelf lubricationSmall coefficient of frictionGood electrical propertiesGood machinabilityAnti Corrosive nature
Sizes Manufactured:
3mm to 200mm dia
Good shock absorbing propertyLonger functional lifeOptimum wear resistance
Other Details:
Excellent heat resistance and non-inflammabilityVery good impact resistance and toughnessVery good shock absorbing propertiesExcellent abrasion resistance
Used in BearingsCamsWashersGearsGrommetsSpindlesNuts & Bolts & Pulleys

Yes! I am interested

Get Best Quote

Approx. 200 / Piece Get Latest Price

Acetal Rod, Delrin Rod, Acetal Sheet & Tube

Dotmar offers both homopolymer and copolymer grades of Acetal Rod, Sheet and Tube. Ertacetal®C (Acetron® GP) is porosity-free and offered as our standard general purpose grade. For slightly higher mechanical properties, we offer as a non-standard, homopolymer Ertacetal® H (Acetal) (Delrin®) products.

Ertacetal H (Delrin), homopolymer acetal rod, sheet and tube offer slightly higher mechanical properties than Ertacetal  C Acetal, but may contain a low density centre, especially in larger cross-sections. Ertacetal C (Copolymer) also offers better chemical resistance than momopolymer acetal. Ertacetal H is suitable for small diameter, thin-walled bushings that benefit from the additional strength and rigidity of homopolymer acetal.

It is the preferred acetal for food contact and medical applications. Ertacetal, (Dotmar's trade name for acetal rod, acetal sheet and acetal tube) is a semi-crystalline material with high strength, a low coefficient of friction and good wear properties especially in wet environments (resistance to hydrolysis).

Advantages of Acetal Rod, Acetal Sheet and Acetal Tube:

Acetal's great machinability together with its dimensional stability, mechanical strength, zero moisture absorption and good load-bearing properties make it ideal for close-tolerance parts.

  • Ertacetal C

Key Features of Acetal Rod, Acetal Sheet and Acetal Tube:

  • High hardness and stiffness
  • Very high mechanical properties
  • Excellent creep resistance and dimensional stability
  • Excellent dielectrical properties
  • Low co-efficient of friction

Applications of Acetal Machined Parts:

  • Precision gears
  • Bearings with close tolerances
  • Electrical engineering insulators
  • Compact bearing assembly
  • Snap fit assemblies
  • Parts which operate in water between 60 to 90;C


Distribution Acetal Products:

  • Available in Acetal Rod, Acetal Sheet, Acetal Tube, Acetal Machined Parts

Yes! I am interested

Get Best Quote

Approx. 150  Get Latest Price

Polypropylene Sheet & Rod


The non-polar structure of Polypropylene Sheet and Rod gives it a very high molecular mass. This makes PP Sheet and Rod highly resistant to chemicals and to aqueous solutions of salts, acids and alkalis.

Polypropylene homopolymers have a high level of stiffness and toughness at room temperature. This together with their capacity to repel water makes them a good choice for mechanical and structural applications.

Advantages of Polypropylene Sheet:
Polypropylene Sheet properties ensure that this material is a hard, stiff, easily workable material with excellent toughness and available in Polypropylene Sheet, Rod, Tube and Polypropylene Weld Rod.

It is an easily weldable thermoplastic which makes it ideal for tanks, fittings and vessels for the mineral processing, mining and galvanising industries.

Polypropylene PP Sheet and Rod Products:

  • Polystone PP (H) - Homopolymer

Key Features and Benefits Polypropylene PP Sheet Products:

  • Very high chemical resistance
  • Excellent impact resistance
  • Higher scratch resistance than HDPE
  • Thermoformable
  • Excellent moisture resistance
  • Food grade

Applications Polypropylene Sheet Products:

  • Food or corrosive storage vessels
  • Cooling or scrubbing towers
  • Pump bodies and components
  • Wall cladding
  • Plating tanks and hoods
  • Bench tops, etc.

Yes! I am interested

Get Best Quote

Approx. 450 / Kilogram(s) Get Latest Price

This is a cast nylon with built-in oil lubrication. During the manufacturing process, Oil Filled Nylon is completely and evenly dispersed throughout the cast nylon, making it an integral part of the material's structure that cannot spin out, dry out, or drain out, even under the harshest working conditions.

A special formulation of Liquid Lubricant encapsulated during manufacture, provides for true lubrication at the bearing surface.

Oil-Filled Nylon is offered for applications where maintenance lubrication is difficult or impossible. As well, Oil-Filled Nylon's specially formulated OIL, limits moisture adsorption, making Oil-Filled Nylon an ideal bearing material for submerged or critical tolerance applications.

This grade is also available in Oil-Filled Nylon for Food Contact applications.

Features and Benefits:

  • Low Coefficient of Friction
  • Reduced " Slip-Stick "
  • Low Moisture Adsorption
  • Reduced or Eliminated need for Lubrication


  • General Purpose Bearings and Bushings
  • Natural-oil replaces Stainless Steel in Food processing applications: Bottling, Canning, Packing, Processing Friction / Wear applications in Marine Environment Gears, Sprockets and Power Transmission Components

Yes! I am interested

Get Best Quote

Approx. 290 / Kilogram(s) Get Latest Price

As a quality-adhered firm, we are actively betrothed in presenting a wide and comprehensive compilation of Nylon Rod. Accessible with us in multiple stipulations, these are developed under the supervision of trained personnel. Moreover, their availability with us in different sizes and our offered facility of customization has earned us vast appreciation in this nation.



  • Longer life

  • Light weight

  • Reliable finish


Yes! I am interested

Get Best Quote

Approx. 350 / Kilogram Get Latest Price

Based on the skills of our adroit professionals and creative workers, we bring forth an extensive range of Cast Nylon. Owing to features like durability and precise design, the offered range is extensively demanded in the market. A team of our adept professionals, with hard-earned experience manufacture the offered range using superior quality raw material. The offered range is available with us in various sizes, designs and other related specifications.


  • High strength
  • Optimum quality
  • Crack resistance

Rods/Bars sizes available:

  • 15 mm DIA to 400 mm DIA , in the lenth of 300 mm
  • 500 mm, 600 mm & 1Meter or as per customer requirement

Tube Size:

  • 50 mmm OD to 800 mm OD DIA x 25 mm to 750 mm ID in the length of 300 mm, 600 mm & 1meter DIA to 250 mm OD DIA

Sheet Size:

  • 3 mm thinckness to 75 mm thickness , 01 Mtrs x 01 mtrs & 600 mm x 600 mm
  • 80 mm thinckness to 125 mm thickness , 0.500 Mtrs x 01 mtrs & 300 mm x 300 mm

Yes! I am interested

Get Best Quote

Approx. 200  Get Latest Price


UHMWPE (also known as Ultra High Molecular Weight Polyethylene) Sheet and Rod products are manufactured from the semi-crystalline polyethylene (PE) family. Polystone UHMWPE Sheet has a minimal molecular weight of 9 million which has a positive impact on material performance in an abrasive environment.

Polystone UHMWPE Sheet is available in various grades of material depending on the application requirements. Polystone grades available are Polystone 7000 (a virgin grade white UHMWPE sheet and rod product), Polystone 7000SR (a black static reduced sheet and rod product), Polystone 7000 Ultra (a green filled grade of sheet and rod) and Polystone 8000 (glass filled UHMWPE Sheet with a molecular weight of almost 10 million).

Advantages of UHMWPE Sheet and Rod:

UHMWPE properties ensure that this plastic material is very light, extremely tough, chemically resistant and has excellent wear resistance.

Yes! I am interested

Get Best Quote

Approx. 1,000 / Box Get Latest Price

Pp tank, pp duct, pp boxed, chemical reservoir,

Additional Information:
  • Minimum Order Quantity: 1 Box

Yes! I am interested


Corporate Brochure

Explore More Products


Send SMS
Mr. Pravin Jain  (Proprietor)
Poly Metal India
278, Ganesh Peth Laxmi Road
Pune - 411002 , Maharashtra , India
Send E-mail
Share Us: